Monday, May 25, 2009

A Game Where U Can Get Pregnant

First test of the HTC Touch ... Pro2

The technical prerequisites for Windows Mobile 7 recently appeared. As vous pouvez le voir, les spécifications de ce "chassis 1" sont extrêmement intéressantes : Windows Mobile 7 Chassis 1 Specification

Core requirements:

* Processor: ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphics HW (QCOM 8k, Nvidia AP15/16 and TI 3430 all meet spec) * Memory: 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash – 5MB/s unbuffered read @4K block size) * Display: WVGA (800×480) or FWVGA (854×480) 3.5” or greater diagonal * Touch: Multi-touch required * Battery: Sufficient to meet Days of Use LTK requirements. * Controls: Start, Back, Send and End are required (soft controls allowed as long as they are always present). Peripherals:

* Camera: 3MP+, flash optional, 2nd camera optional (VGA resolution sufficient) * GPS: aGPS required * Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate) * USB: High speed required, 20 MB/s transfer rate. * BlueTooth: BT2.1 required, must run MSFT BT stack, CSR BlueCore6 or later recommended.

* Wi-Fi: 802.11B/G required, must run MSFT Native Wi-Fi stack, Atheros 6002 or Broadcomm 4325 recommended.
particular note graphics acceleration, the amount of RAM and ROM requested, the minimum display size (800 * 480!), Multi-touch, and peripherals (GPS, compass, light sensor , USB2 ...).
This platform looks really tempting!


0 comments:

Post a Comment